Park Tool 105 Work Tray Review

The holes are great for axles.



Installed on the PRS 2 repair stand, this tray is useful when I take the fork off, I can put bolts and adapters and small parts in it.




The degreaser holder works great for degreaser cans, but not for lube bottles, as because will eventually fall out and could make a mess,



cheap or free tool alternatives27th april-Keep handle bar ,wheel from turning


Keep handle bar ,wheel from turning:

instead of using Park Tool HBH-2

PTHBH2 Park Tool  Park Tool HBH-2 Styreholder Hindrer styret i å rotere

You can use my method.

This is my method:


Step 1: 

Take 2 loops slide it on the handlebar, and tighten it, and you get this as result

Step 2:

25914283502_7b96d08a02_c or 25914285732_930100dbae_c

take 2 turns around the seat tube or seatpost depending on wheat is possible on your bike.(but if the shoe lases or the frame is too slippery,you can do it on the seatpsot and use the clamp on the bikestand)

step 3: repeat step 1 on the other side.


You can use this knot for brake calliper aliment, just make the hole bigger and slide it over the brake lever and tighten:

I you can’t reach the brake lever,for example if you work on a tandem bike or a utility bike,this method will work great,as long as you have it tight.

Here are some good stuff i found:

Video by RJ The Bike Guy

Video by RJ The Bike Guy

Picture by christoph vetterDSC_0321

This post will be updated with more stuff as I come up with something else or find something else